Before troubleshooting or ordering replacement parts for your FedEx P&D vehicle, it's important to know which type of camera system you have. Using incompatible cameras, cables, or monitors can cause issues like "No Signal" or poor image quality.
Step 1 — Check Your Part Number
Look at the label on your monitor, camera, or product box.
AHD systems typically include:
- "AHD" in the model name (example: PD-775R-AHD)
- A part number ending in "-AHD" or "-1"
FHD systems typically include:
- "FHD" or "CA" in the model name
Standard CVBS systems:
- Usually do NOT include AHD or FHD in the model name
- If there is no signal type in the model name, it is likely a standard CVBS system
Step 2 — Check Your Cable and Connector Type
Most FedEx P&D camera systems use a 4-pin round connector. These connectors look identical across all three signal types.
Important: Just because the connector fits does NOT mean the camera and monitor are compatible. AHD, CVBS, and FHD systems all use the same connector style but are NOT interchangeable.
Need to verify your wiring? View the FedEx P&D Connection Diagrams:
View FedEx / P&D Connection Diagrams (PDF)
Step 3 — Check Your Monitor Compatibility
Your monitor determines what cameras will work with your system.
| Monitor Type | Compatible Cameras |
|---|---|
| CVBS monitor | CVBS cameras only |
| AHD monitor | AHD cameras only |
| FHD monitor | FHD, AHD, and CVBS cameras |
Common Compatibility Issues
| Combination | Result |
|---|---|
| AHD camera + CVBS monitor | No Signal |
| FHD camera + non-FHD monitor | No Signal |
| Mixing different signal types | No image or poor image quality |
Step 4 — Use the Connection Diagrams
The FedEx P&D Connection Diagrams PDF shows the correct wiring configurations for common FedEx vehicle setups. Use it to:
- Confirm your connections are correct
- Identify mismatched components
- Troubleshoot wiring issues
View FedEx / P&D Connection Diagrams (PDF)
Still Not Sure?
Check your original order confirmation or product box for the model number. If you still can't identify your system, email us at customerservice@rearviewsafety.com with:
- A photo of your camera and its connector
- A photo of your monitor
- Any part numbers visible on your equipment
- Your vehicle type (sprinter van, step van, etc.)
Or Contact us: 📧 customerservice@rearviewsafety.com 📞 800-764-1028 💬 Text: 929.668.9530
Related Articles
0 Comments